Clear Freedom Panels for Jeep Wrangler JL
CL300 replaces the front Freedom Panels on 2018–Present Wrangler JL and JLU hardtops.
Front roof panel upgrade. Confirm your Jeep model before ordering.
Wrangler JL fitment
CL300 fits 2018–Present Jeep Wrangler JL and JLU hardtops, including two-door and four-door models.
Check the Jeep generation as well as the year. A 2018 Wrangler may be a JK or JL; the two generations use different ClearLidz products.
For a 2018 Wrangler, check whether you have a JK or JL before ordering. CL300 fits JL/JLU and JT models; choose the listing for your vehicle. Standard installation keeps the compatible rear hardtop in place.
- Fits 2018–Present JL/JLU
- 2-Door & 4-Door Models
- Approx. 15-minute install
- Model-Specific Fit
- ModelJeep Wrangler JL / JLU
- Years2018–Present
- Body Style2-Door and 4-Door
- Product StylePanoramic Freedom Clear Top
- InstallApproximately 15 minutes
- Made InUSA
Replaces the front Freedom Panels
ClearLidz replaces the two factory front Freedom Panels with one transparent roof section. Standard installation retains a compatible rear hardtop.
ClearLidz can also be used with the rear hardtop removed, with additional support for a secure fit. Contact ClearLidz for the setup required for your model.
Front roof section only. Standard installation and rear-hardtop-off setups have different support requirements.
ClearLidz features
-
A full 180° panoramic view
Enjoy a full 180° panoramic view through one transparent roof section above the front seats.
-
Factory mounting locations
Standard installation uses the factory mounting locations and keeps a compatible rear hardtop in place.
-
Wrangler example shown. Support requirements vary by model. Use with the rear hardtop removed
ClearLidz can be used with the rear hardtop removed to give a topless feel. Additional support is needed for a secure fit. Contact ClearLidz for your model’s requirements.
-
Durable polycarbonate
Made from impact-resistant polycarbonate.
-
Made for every season
From summer sun to winter snow, with 99% UV protection and weather sealing when properly installed.
-
Proprietary protective coating
Helps resist yellowing, UV degradation and scratches. ClearLidz can also go through a car wash.
-
Installs in about 15 minutes
Follow the installation instructions for your Jeep model.
-
Made in the USA
Manufactured in the USA, with direct help from the ClearLidz team for choosing your top and getting the fit right.
-
Mopar® Affiliated Accessory
ClearLidz roof panels are part of the Mopar® Affiliated Accessories program.
Installing CL300
Standard installation takes approximately 15 minutes. Follow the CL300 manual for your model, position the door seals, secure the hardware and check the fit, and you’re ready to go!
CL300 installation for JL / JT models
Download CL300 instruction manual (PDF)
View full installation guidesRemove Your Factory Freedom Panels
Follow the Jeep owner’s manual to release and remove the factory front panels. Store them in a protected place.
Position the top and door seals
Follow the CL300 guide to position the top and driver- and passenger-side door seals. Keep the compatible rear hardtop in place.
Secure the hardware and check the fit
Hand-tighten the thumbscrews and secure the latches as shown in the guide. Do not overtighten. Check alignment and the seal before driving; contact ClearLidz if anything does not seat correctly.
ClearLidz CL300 vs. Factory Freedom Panels
ClearLidz replaces two opaque Freedom Panels with one transparent roof section.
| Feature | Factory Freedom Panels | ClearLidz CL300 |
|---|---|---|
| Material | Fiberglass composite | High-impact polycarbonate |
| Overhead view | Opaque front panels | Transparent panoramic view |
| Panel design | Two separately removable panels | One-piece front roof section |
| UV and light | Opaque roof blocks overhead light | UV-filtering polycarbonate lets in light |
| Factory integration | Original mounting locations | Uses the factory mounting locations |
| Rear hardtop | Stays in place | Stays in place for standard installation |
Frequently Asked Questions
Do Clear Lidz fit Jeep Wrangler JL models?
Do Clear Lidz replace the full Jeep hardtop?
No. ClearLidz replaces the front Freedom Panels. Standard installation retains the rear hardtop. ClearLidz can also be used with the rear hardtop removed, with additional support for a secure fit. Contact ClearLidz for the setup required for your model.
Are JL and JK Clear Lidz panels interchangeable?
What is involved in installation?
Allow approximately 15 minutes for standard installation. Follow the instruction manual for your model, check the seals and secure the hardware before driving. See the video and download the manual.
Will Clear Lidz fit both 2-door and 4-door JL models?
Is Clear Lidz good for daily driving?
Can I use an aftermarket hardtop?
For standard installation, the rear hardtop must accommodate the OEM Freedom Panels. ClearLidz uses those attachments.
Can ClearLidz be used with a soft top?
ClearLidz replaces the Freedom Panels on a hardtop-equipped Jeep. It cannot be installed with the soft top in place. It can be used when the soft top is completely removed, with additional support for a secure fit. Contact ClearLidz for advice on your setup.
Can I use ClearLidz without the rear hardtop?
Yes. ClearLidz can be used on its own over the front seats with the rear hardtop removed. This setup requires additional support for a secure fit. Contact ClearLidz for the requirements for your Jeep model before installing it this way.
Can I get help choosing or installing my ClearLidz?
Yes. ClearLidz offers direct, personalized customer support. Contact the team for help with fitment, installation or your Jeep's roof setup.
CL300 for Wrangler JL
View current pricing and availability.
