Clear Roof Panels for Jeep Gladiator JT
CL300 replaces the front Freedom Panels on 2020–Present Gladiator JT hardtops.
Front roof panel upgrade. Confirm your Jeep model before ordering.
Gladiator JT fitment
CL300 fits 2020–Present Gladiator JT hardtops. The one-piece transparent front section uses the factory mounting locations and retains the rear hardtop for standard installation.
Confirm your Gladiator’s model year and hardtop configuration before ordering.
CL300 fits 2020–Present Gladiator JT models and replaces the front Freedom Panels. Keep the compatible rear hardtop in place for standard installation. If you have a different roof setup or plan to remove the rear hardtop, contact ClearLidz before ordering.
- ModelGladiator JT
- Years2020–Present
- BodyGladiator JT crew cab
- ProductCL300
- ReplacesFactory front Freedom Panels
- Rear hardtopRemains in place
Replaces the front Freedom Panels
ClearLidz replaces the two factory front Freedom Panels with one transparent roof section. Standard installation retains a compatible rear hardtop.
ClearLidz can also be used with the rear hardtop removed, with additional support for a secure fit. Contact ClearLidz for the setup required for your model.
Front roof section only. Standard installation and rear-hardtop-off setups have different support requirements.
ClearLidz features
-
A full 180° panoramic view
Enjoy a full 180° panoramic view through one transparent roof section above the front seats.
-
Factory mounting locations
Standard installation uses the factory mounting locations and keeps a compatible rear hardtop in place.
-
Wrangler example shown. Support requirements vary by model. Use with the rear hardtop removed
ClearLidz can be used with the rear hardtop removed to give a topless feel. Additional support is needed for a secure fit. Contact ClearLidz for your model’s requirements.
-
Durable polycarbonate
Made from impact-resistant polycarbonate.
-
Made for every season
From summer sun to winter snow, with 99% UV protection and weather sealing when properly installed.
-
Proprietary protective coating
Helps resist yellowing, UV degradation and scratches. ClearLidz can also go through a car wash.
-
Installs in about 15 minutes
Follow the installation instructions for your Jeep model.
-
Made in the USA
Manufactured in the USA, with direct help from the ClearLidz team for choosing your top and getting the fit right.
-
Mopar® Affiliated Accessory
ClearLidz roof panels are part of the Mopar® Affiliated Accessories program.
Installing CL300
Standard installation takes approximately 15 minutes. Follow the CL300 manual for your model, position the door seals, secure the hardware and check the fit, and you’re ready to go!
CL300 installation for JL / JT models
Download CL300 instruction manual (PDF)
View full installation guidesConfirm your Gladiator setup
Check the JT model year and roof configuration, then review the CL300 installation guidance.
Position the top and door seals
Follow the CL300 guide to position the top and driver- and passenger-side door seals. Keep the compatible rear hardtop in place.
Secure the hardware and check the fit
Hand-tighten the thumbscrews and secure the latches as shown in the guide. Do not overtighten. Check alignment and the seal before driving; contact ClearLidz if anything does not seat correctly.
ClearLidz CL300 vs. Factory Freedom Panels
ClearLidz replaces two opaque Freedom Panels with one transparent roof section.
| Feature | Factory Freedom Panels | ClearLidz CL300 |
|---|---|---|
| Material | Fiberglass composite | High-impact polycarbonate |
| Overhead view | Opaque front panels | Transparent panoramic view |
| Panel design | Two separately removable panels | One-piece front roof section |
| UV and light | Opaque roof blocks overhead light | UV-filtering polycarbonate lets in light |
| Factory integration | Original mounting locations | Uses the factory mounting locations |
| Rear hardtop | Stays in place | Stays in place for standard installation |
Gladiator JT fitment questions
Which Gladiator years does this CL300 fit?
CL300 fits 2020–Present Gladiator JT hardtops. Confirm your model year and hardtop configuration before ordering.
Does CL300 replace the entire Gladiator hardtop?
No. ClearLidz replaces the front Freedom Panels. Standard installation retains the rear hardtop. ClearLidz can also be used with the rear hardtop removed, with additional support for a secure fit. Contact ClearLidz for the setup required for your model.
Can I remove ClearLidz?
Yes. Remove and store the top following the product manual. Plan for weather and keep the roof in a protected place when it is off the Jeep.
What is involved in installing CL300 on a JT?
Allow approximately 15 minutes for standard installation. Follow the CL300 guide for seal placement, thumbscrews and latches. Check alignment and the seal before driving. View the installation guides.
What if I notice wind noise or a fit issue?
Check the seals and hardware against the CL300 manual. Contact ClearLidz support if an adjustment is needed.
Can I use an aftermarket hardtop?
For standard installation, the rear hardtop must accommodate the OEM Freedom Panels. ClearLidz uses those attachments.
Can ClearLidz be used with a soft top?
ClearLidz replaces the Freedom Panels on a hardtop-equipped Jeep. It cannot be installed with the soft top in place. It can be used when the soft top is completely removed, with additional support for a secure fit. Contact ClearLidz for advice on your setup.
Can I use ClearLidz without the rear hardtop?
Yes. ClearLidz can be used on its own over the front seats with the rear hardtop removed. This setup requires additional support for a secure fit. Contact ClearLidz for the requirements for your Jeep model before installing it this way.
Can I get help choosing or installing my ClearLidz?
Yes. ClearLidz offers direct, personalized customer support. Contact the team for help with fitment, installation or your Jeep's roof setup.
CL300 for Gladiator JT
View current pricing and availability.
